PupFlask Replacement Part Lid

Tuff Pupper PupFlask Replacement Part for Lid (27oz; not sure if the lid is the same size on the larger model) See on amazon (non-affiliate link).

My bottle took a nasty tumble, and the top broke rendering it unusable. Luckily there were large enough pieces to be able to reverse-engineer it by taking measurements and model a replacement part.

Hopefully this will help others in a similar situation. Could also be used to customize the coloring. Simply pop off the OEM part and replace with 3D printed part.

Some sanding post-print may be required for improved surface finish.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

Yes

Resolution:

0.1mm

Infill: 

20%

Filament: Formfutura EasyFil PLA Grey

Notes:

I printed it with the top surface face-down with some minor supports from the baseplate. No supports necessary elsewhere.