I've created two versions, one for single extruder and one for Multi color printers such as the Prusa MMU or the Mosiac Palette.
For the single extruder model pause the print and change colors as indicated.
Orange@0mm
White@2mm
Blue@3mm
Print the single extruder model at 0.2mm layer heights.
I usually, use this website to add the change filament (M600) command into my sliced gcode.
https://www.prusaprinters.org/color-print/
I've added a smaller version and they are labeled with the prefix "sm".
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
.15
Notes:
If you are printing with a Prusa MMU or Palette+ or similar in three colors the first color layer looks bad but it will finish nice. Some users have trouble when printing with low infill (15% or less) so try 20-25%.
Category: Sport & OutdoorsThe author marked this model as their own original creation. Imported from Thingiverse.