Storm32 F550 Gimbal Mount

This mount is for attaching a Storm32 3-Axis gimbal to a F550 hexacopter frame. The arms are 66mm wide from tube to tube and the tube hole size is 8.3mm so its a snug fit on 8mm rods. There are two versions of the design, one with the "GIMBAL" text and one without.

Print Settings

Printer:

Anet E10

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

100

Notes:

Id recommend printing at 100% infill so that you have the best chance of not breaking the arms while trying to slide it onto the tubes. Also for supports id reccomend grid type so that the tube holes come out as clean as possible.