Articulating modular piano desk lamp

So my son needed a Lamp for his piano, I had some led strip lying around and was willing to put this to good use..

For this build you I used:

Lamphead from https://www.thingiverse.com/thing:3593334

2x END.stl

1x MIDDLE.stl (you need to snip out the reinforcement at the mount, I also drilled a hole for the LEDstrip cable to this spart)

Lamp arm fom https://www.thingiverse.com/thing:3158481

2x joiner.stl (one of those needs the teeth removed at one end)

2x 200_arm.stl

2x 100_arm.stl

4x Knob.stl

3x cable_clip.stl

From this project:

the box+lid

Additional Hardware:

3x M4x16 Flathead + nut

4x M5x35 Hexhead + nut (I didn't have those as I took the photos)

LED Strip

AC converter for LED strip

AC cord with switch

Print Settings

Printer Brand:

Prusa

Printer:

MMU2s