Medieval-themed Indirect LED Lighting

I needed to hide an ugly LAN cable mounted high along my wall so I decided to create a medieval themed LED lighting concept to hide the cable behind.

There are several files here:

"Wall Segment With Texture": 30cm Wall segment, two mounting holes.

"Wall Segment With Texture 20cm": 20cm Wall segment, one mounting hole.

"Tower": banked Tower, used to hide the electric cabling (which in my case was in the middle of the wall)

"reducer Wall"/"reducer Tower": Diameter reducer that allows me to use nails to mount the parts instead of the original designed screws.

The wall-mounting can be done with two screws per Part, which are placed in a way that allows you to place a screw every 15cm and hang each wall segment on any pair of the screws.

A 30cm printing bed is REQUIRED as even diagonally, a module will not fit on a 20x20cm Bed. Printing with Brim will no work since the part is 30cm in width.

Created in FreeCAD and OpenSCAD

Print Settings

Printer:

JGAurora A5

Rafts:

No

Supports:

No

Resolution:

0.3mm (Wall) / 0.1mm (Tower, reducer)

Infill:

10% Bicubic

Filament:

White