Prusa I3 MK2/MK2s Filament Guide (wide slot)

Slot type filament guide, useful if you print tall objects and full 1kg spool

Update 2018-09-06:

• added small notch for easier placing of the filament in case you already put it in the extruder (needs to be sliced after print)
  Update 2018-06-16:

• the clip and stem are slightly beefier

• the slot shorter and wider(so it doesn't bind on full or almost emprty spool)
  I printed it with 3+ perimeters(shells) with 0.4 nozzle, 0.2mm layer height and i think 10% infill

  Works with that type of spool holder
  https://www.thingiverse.com/thing:1832235

Print instructions

Category: 3D Printer Accessories Print Settings

Printer Brand: Prusa

Printer: i3 MK2S

Rafts: Doesn't Matter

Supports: No

Resolution: 0.2mm

Infill: 5-10%

Notes:

I printed it in PLA. If you have good adhesion and your setup is printing well up to 45deg it prints without issues