Fireworks Igniter Connection Protector / Cable Guard for Bilusocn 4-Cue Receiver

The protector shields the igniter terminal connections while still allowing easy cable routing and access during setup. It helps reduce accidental disconnections, keeps wiring more organized, and offers some mechanical protection during transport and field use.

Features

• Protects igniter terminal connections

• Keeps cables accessible during operation

• Designed for quick installation and removal

• Lightweight and easy to print

• Useful for transport and outdoor setup

Printing

Recommended settings:

• Layer height: 0.2-0.4 mm, depending on nozzle

• Infill: 15–25%

• Supports: usually not required

• Material: PLA or PETG

I printed mine at 0.4 mm with a 0.8mm nozzle. With this, a cover took roughly 20 minutes.
PETG is recommended for improved durability and outdoor temperature resistance.

The model is provided both as a standard single-color version and as a simple two-color variant.
For the two-color print, start by printing the flame detail for the first layer in a contrasting filament color. Then pause or switch filaments and continue printing the remainder of the model in the main color.

Notes

• Designed specifically around the Bilusocn-style 4-cue receiver housing

• Fit may vary slightly depending on manufacturing tolerances

• Please verify fitment before field use

Safety

This model is intended only as a cable and connection protector.
Always follow local laws, regulations, and standard fireworks safety procedures when operating electronic firing systems.