Grow Tent Pole Clamps For Wire Organization, GoPro Mounting, and More! ***Updated With 16mm & 22mm Clamps***

These clamps help organize the wiring mess inside your standard grow tent. GoPro Mount and Netting Hook Included!
1h 10m
1× print file
0.35 mm
0.40 mm
22.00 g
180
797
6
3401
updated November 7, 2022

Description

PDF

***Updated 11-7-2022  | Now Compatible With 15mm & 22mm Tent Poles | ***

Added 22mm ID versions of all clamps to add compatibility with grow tents that utilize 22mm OD support poles. If you need a version of these clamps with a different inner diameter, please leave a comment and I will work on adding those sizes. 

I grow heirloom tomatoes over the winter in a cheap grow tent I bought on Amazon, and as with everything, I improved the tent's infrastructure by designing and printing these small clamps.  One of my biggest issues was the jumble of wires from the fans, grow light, GoPro, water pump relay, etc, these clamps were the solution to that issue. 

I have also included a GoPro mount that clamps to the support poles, as well as a trellis netting hook that mounts to the poles as well. 

I printed my clamps out of PETG to aid in flexibility when installing them onto the support poles. PLA will work, but the UV light degrades it and makes it brittle after a season of growing, and they snap when removed. PETG solved this problem. 

Use zip ties through the small holes on each clamp to secure the poles. If your poles are too slick and the clamps slide, wrap the pole with one wrap of electrical tape. 

Confirmed To Work With These Grow Tents
These clamps have been tested in the following grow tents, and they should work on any tent that utilizes 15-16mm & 22mm support poles. Thanks to everyone who has messaged me with other tent brands that these clamps work with. If you have confirmed this to work with other brands than listed below, please leave a comment or send me a DM and I will add it to the list. 

*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.

Remix Culture Approved! - To aid in remixes from the community I have added the design files in all of the relevant formats for you to download. Note that I have included an updated version of the design files that includes the new 22mm sizes. I have left the original design files as well to preserve version control. 

Design File Included: .f3d, .ipt, step, .skp, and .obj files. 

Follow The Makers Workbench on:

Print Settings

I have only tested this model using the default 0.35mm Fast preset in Prusa Slic3r 2.4.1 with the following amendments made.

  • 6-perimeters
  • 4-top layers
  • 4-bottom layers
  • 20% infill
  • Rectilinear Infill
  • Monotonic Top and Bottom Pattern

PETG Used: Overture PETG - https://amzn.to/3fI8Bsa 

Tags



Model origin

The author hasn't provided the model origin yet.

License