Hydration Bladder Drying Rack, Mk 2

This is an improved version of my old drying rack design for hydration bladders (Trinkblase).

This new version now has foldable arms that make inserting the drying rack into your hydration bladder and getting it back out much easier!
With some strings attached to the arms and guided out of the neck, folding the arms out and back in is a breeze - just pull on the corresponding strings. Check out the photos for an example showing how to connect everything.
I also added a pull ring that you can tie the strings to for easier handling (and for labeling which is which).

There are differently sized arms that you can print, so you can match the drying rack to the size of your hydration bladder.

Like the old version, the drying rack comes with a hanger and a foldable foot. As per public request, the foot is now substantially larger so the dryer doesn't tip over as easily anymore.
Be careful when breaking in the hinge of the foot; firmly hold the top and bottom section and then gently try to turn the middle section.
Please let me know when you're having trouble with the tolerance of the foot's hinge.

The drying rack can be printed from any material you like. PLA, PETG, PCTG, etc. should all be fine.
Make sure to disable supports for the print - you won't need them.