IKEA SKÅDIS // clean wallmount

A clean and minimalist wall mount for IKEA SKÅDIS with a unique oval design.

This model is a minimalist wall mount designed for the IKEA SKÅDIS pegboard system.

Unlike most existing designs, this version features a smooth oval shape, giving it a softer and more modern appearance compared to traditional round mounts.

It can be used as a replacement for the original mounting hardware or as part of a custom DIY setup with SKÅDIS-compatible boards.

The simple geometry ensures fast and reliable printing while maintaining a clean and subtle look on your wall.

✨ Features

• Unique oval design (not circular)

• Minimalist and clean appearance

• Easy and fast to print

• No supports required

• Strong and reliable mounting solution

🖨 Print Settings

• Material: PLA or PETG

• Layer height: 0.2 mm

• Infill: 20%

• Perimeters: 2

• Supports: Not required

• Orientation: As provided in the .3mf

💡 Tip: Use PETG for improved strength and durability.

🔩 Required Hardware

• Screws

• Wall anchors (depending on your wall type)

I used the following screws:

• diameter: 4.5 mm

• length: 40 mm

🛠 Assembly Instructions

1. Mark the position

Mark the desired position of the mounts on the wall.

2. Drill holes

Drill the holes according to your screws and wall anchors.

3. Attach the mount

Mount the spacer-A (from the back of the pegboard):

From the front it should now look like this:

Now spacer-B can be mounted:

4. Install the pegboard

Now the pegboard is ready to be mounted on the wall.

Do not overtighten to avoid damaging the part!

Once all the screws are tightened, the cap (spacer-C) can be attached.

5. Complete

Done! Your IKEA Skadis pegboard is now securely and cleanly mounted.

⚠ Notes

• Use proper wall anchors suitable for your wall type

• Do not overload the mount (depends on material and wall strength)

• Avoid overtightening screws