Espresso Needle Distributor
Needle distributors can be used to remove clumps from grounds that have been poured into the portafilter.
2
32
1
636
updated April 14, 2022
Description
PDFInstructions
You will need to print 8 copies of the part in order to make one complete distributor. I recommend gluing them into 2 groups of 4 and then gluing the 2 semi-circles together.
Print settings
Layer Height: 0.2mm
Support: None
Build Plate Adhesion: None ( I tested with brim but trimming it off the needles was very difficult)
Tags
Model origin
The author hasn't provided the model origin yet.
