My Intex Adapter for Pool Connectors - Adapter piece

I have a smaller Intex pool (with 1 1/4" tubing) and wanted to use a larger pump (with 1 1/2" tubing). I could have purchased something like this:

https://www.amazon.com/INTEX-Adapters-Pumps-Saltwater-System/dp/B000RSICZU/

But this thing is most of what I wanted: http://www.thingiverse.com/thing:446404

I just needed to modify the smaller end to fit over the smaller connectors instead of inside the smaller tubing. That's this thing. I also didn't have the extra threaded snap-on connectors that I needed so I made them (see http://www.thingiverse.com/thing:1625135). You will need an o-ring. I used a BrassCraft SC0542 1 1/4" x 1 7/16" o-ring I found at Lowe's. You will also need a 1 1/4" (or slightly larger) hose clamp. I used one from an assortment I got at Harbor Freight.

Print Settings

Printer:

Monoprice Maker Select

Rafts:

No

Supports:

Yes

Resolution:

0.25

Infill:

25%