Customizable Inductive Probe Mount for Wanhao i3 and Clones

Mount for an inductive probe (or other device which mounts through a round hole) for mounting to the print fan mount of the Duplicator i3 and similar (or really, anything that mounts with two holes next to each other). Should be compatible with the stock layer fan and various other fan configurations but you might need longer screws. I'm using the Cobra rear-mount fan so my fan mount would be empty except that I also am using a swinging fan mount for the hotend heatsink that attaches to the fan mount.

Should be customizable to fit various probes and mounts.

Print Settings

Printer:

Monoprice Maker Select

Rafts:

No

Supports:

Yes

Resolution:

0.25

Infill:

4mm 3d infill (i.e. 10% with a 0.4mm nozzle)

Notes:

Use supports if printing with an offset. No support needed if there is no offset.