BMG + E3D V6 Part Cooling Fan Duct 5015 (standalone/modular)

A simple fan duct for part cooling of BMG and E3d V6 Hotend direct drive(no bowden) setup with 5015 blower Fan. I made this standalone so that you can just hook it up with BMG itself. The duct is also modular if you wish to print it with other material(PETG for the Mount, ABS for Duct). The mounting holes can be adjusted to vary the height of the fan duct.

I made this to give me enough view of the nozzle during printing.

You may need additional screws with enough length to attach the mount to BMG. Set of screws and nuts are also needed to attach the 5015 blower fan to the mount.

Please see attached Benchy photos of some overhang and bridges performance.

This setup pairs well with my 5015 Adapter for Heatsink Cooling Fan Shroud of E3D V6: Click Here.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

At least 50%

Filament: Generic PETG Silver How I Designed This ===================

I've used SolidWorks 2020 with Flow Simulation to visualize the air flow.