Converted Pulley from V-wheel Rollers

A simple conversion pf POM V-wheel/roller into a pulley. This part is from an old 3d Printer.

I used this for my DIY cable pullups machine.

Support may be needed depending on the layer height or you may cut in the center and glue them together.

I used superglue as adhesive of the printed part to the roller and used an M5 screw and nut to the shackle/clevis.

Print Settings

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.2

Infill:

at least 50% Triangular

Filament: Esun ABS+ Peak Green