24/410 Dispensing Cap

I'm a big fan of Squirt drip wax. Unfortunately, I cracked the auxiliary cap on the bottle, so I have been resorting to keeping it sealed with some painter's tape. 

I was pretty surprised that I couldn't find a 24/410 dispensing bottle cap 3D model online and I didn't want to buy a 50 pack on Amazon, so I spent way too much time iterating on details and should have bought the 50 pack but oh well made one! Here ya go.

• I recommend printing this with 0.12 mm layers, and this is important for the main bottle cap.

• There's a "bridge counterbore" feature modeled in so that you don't need support to print the floating underside of the main counterbore (shout out to this great Onshape FeatureScript!)

• 0.12 mm layers seems to be good enough for nice thread performance too.

• Would I trust this upside down in a bag? No. But that's up to you. I did try squeezing the bottle with the printed cap closed and it doesn't seem to leak!

• I recommend printing this with many perimeters so that it's mostly solid. I printed mine in ABS. 

Hope you enjoy!