Temperature Calibration Tower for Anycubic PLA

I really liked the temperature calibration tower by fanlabise - http://www.thingiverse.com/thing:1956512 - but the Anycubic PLA I just bought off Amazon - https://www.amazon.com/gp/product/B017R4OPU2 - is rated between 190 and 230 degrees... slightly out of the range of the original tower. I added an extra step and relabeled the temperature marks.

As with the original, you will have to modify your gcode temperature each centimeter (10mm). This can be done relative easily with the Post Processing | Modify G-Code extension in Cura.

-=[ EDIT ]=-

After printing this, I noticed that the text is not readable as is. I have scaled this up and embossed larger text. The new model is v2.

Print Settings

Printer:

Tevo Tarantula

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.1 - 0.3

Infill:

20%

Notes:

Adding a brim might be advisable to help with adhesion on such a tall model.