BLTouch Mounting Plate For Modular X Carriage by Elzariant

I love the Modular X Carriage Mounting System designed by Elzariant, but the mounting plates for the touch sensors do not allow for a large enough sampling area, due to their position and distance from the nozzle.

I designed this to place the BLTouch (and clones such as the 3DTouch) as close to the nozzle as possible. It is mounted to the system using the same mounting holes as the hot end mounting plate (on the right side). You'll need two 3x30mm screws to account for the increased thickness. Screw for mounting the sensor to the bracket are usually included with the sensor itself, but if not, a couple of 3x20mm screws and nuts should be fine.

The sensor location is X: +42mm, Y: +3mm

NOTE Due to either a Thingiverse bug or (more likely) shadowbanning, my models no longer show up under the [Newest] listings. If you want to see more of my models, please be sure to 'follow' me.

Print Settings

Printer Brand:

TEVO

Printer:

Tarantula

Supports:

No

Resolution:

0.2mm

Infill:

at least 70%