Craftsman Prerssure Washer Replacement Wand Trigger

Summary

This is a replacement trigger for the wand used on a Craftsman pressure washer, model # 919.769020. It could possibly fit others. The original broke at the point where the trigger lock mounted. Since I have never figured out why you'd want to lock the triggerclosed (locking itopen I could understand) I just modeled this without that weak point.

Print Settings

Printer Brand:

TEVO

Printer:

Tarantula

Supports:

Yes

Resolution:

0.2mm

Notes:

For structure integrity, it is recommended that you print this in the orientation that it is presented. Since this places only the small nipple actually touching the bed, I recommend a [brim] of between 3 to 7 mm, with [supports] enabled everywhere. I also suggest that you turn on [support interface] for a better looking finish on the bottom side. These are the settings that I used on my own print.