Modified Mold for EggBot

I have been using the silicone molds for Egg Painter Mini posted by @ANicolai but I noticed that the marker hits the edge of the larger pad when it gets close to that end. To solve that problem, I trimmed the edge of the pad down at an angle with an X-acto knife and it worked much better. So... to that end, I have recreated mold_a with a built in bevel. While I was at it, I added a curve to the indention to help grip the egg better than the flat did.

Print Settings

Printer Brand:

TEVO

Printer:

Tarantula

Supports:

No

Resolution:

0.2mm

Infill:

20%