3D Models 3D Printers Accessories

Original Prusa i3 MK3 ENCLOSURE -Ikea Lack table - Prusa Research

Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/…

48h 44m

10× print file

0.35 mm
0.20 mm

0.40 mm

688.00 g

3,446

46 k

557

188 k

updated November 6, 2018

Makes

Comments

Makes only

Marius-Andrei Mihalache

@MariusAndrei_2196275

Quite modified and 95% done only (since I'm not fully moved into the new apartament yet), can't wait to see how behaves in the future

@thenotorious_2819464

Ikea lack for my mk3, worked great for years. I cut the corners so the plexi sits closer to the lack

@AlbertBartos_1886283

The 105mm PSU will not fit in this bracket! You'll need to resize it yourself or just look for a more appropriate design. I chose the latter and am happy with it.

Matteo La Carbonara

@MatteoLaCarb_2967672

Printed perfectly. Modified the opening handles to fit in my wardrobe.

great design!!!!

@Fvones_2963979

leonardo_bellini_

@leonardo_bell_178310

@Learnprint3D_2870121

I think I have to print out the shorter bed cable cover.