HG gundam base. I use these for my kits because its cheaper and less noticeable than the one's you can buy. I made the top 3mm pin slightly drafted. If you need a tighter fit or it to go in further use your nippers and clip a tiny bit off the top.
I have added a version 2 where you can instead cut a bit of runner and stick it down the hole on the top. this lets you get a better and stronger peg to the kit. The hole is meant for a 3mm runner snip.
V3 lets you print in parts resulting in a much cleaner and stronger print. there is a hole for the peg. the peg file needs to be cut in half post print. use either half. i merged to pegs for better print quality and reliability.
Category: Model Robots
The author marked this model as their own original creation. Imported from Thingiverse.