preset_stl
17
files
spool_sleeve-Polymaker-55.0mm
stl spool_sleeve-Polymaker-55.0mm
stl 2 MB | June 6, 2026
spool_sleeve-Old_Hatchbox-54.8mm
stl spool_sleeve-Old_Hatchbox-54.8mm
stl Too wide—no spool latches
3 MB | June 6, 2026
spool_sleeve-New_Hatchbox-54.8mm
stl spool_sleeve-New_Hatchbox-54.8mm
stl Spools with hexagon cutouts
2 MB | June 6, 2026
spool_sleeve-Elegoo_Cardboard-54.3mm
stl spool_sleeve-Elegoo_Cardboard-54.3mm
stl 3 MB | June 6, 2026
spool_sleeve-Overture_Cardboard-55.5mm
stl spool_sleeve-Overture_Cardboard-55.5mm
stl 3 MB | June 6, 2026
spool_sleeve-SIRAYA_Tech-55.7mm
stl spool_sleeve-SIRAYA_Tech-55.7mm
stl Large OD—may rub in drybox; Too wide—no spool latches
3 MB | June 6, 2026
spool_sleeve-Sunlu_Old_Non-Perforated_500g-73.2mm-72.0mm
stl spool_sleeve-Sunlu_Old_Non-Perforated_500g-73.2mm-72.0mm
stl OpenPrintTag on outside of flange
4 MB | June 6, 2026
spool_sleeve-Fillamentum_Clear_750g-53.0mm
stl spool_sleeve-Fillamentum_Clear_750g-53.0mm
stl 2 MB | June 6, 2026
spool_sleeve-BASF_350g-52.4mm-52.0mm
stl spool_sleeve-BASF_350g-52.4mm-52.0mm
stl 991 kB | June 6, 2026
spool_sleeve-Fused_Materials-53.7mm-53.4mm
stl spool_sleeve-Fused_Materials-53.7mm-53.4mm
stl 3 MB | June 6, 2026
spool_sleeve-NinjaTek-0.25n-52.0mm-51.5mm
stl spool_sleeve-NinjaTek-0.25n-52.0mm-51.5mm
stl OD too big to fit drybox! OpenPrintTag support only! Must use 0.25mm nozzle!
858 kB | June 6, 2026
spool_sleeve-TreeD_Black_Plastic-53.3mm-52.4mm
stl spool_sleeve-TreeD_Black_Plastic-53.3mm-52.4mm
stl Large OD—may rub in drybox; May need more shrinkage compensation than other sleeves
2 MB | June 6, 2026
spool_sleeve-SainSmart_Black_Plastic-57.3mm
stl spool_sleeve-SainSmart_Black_Plastic-57.3mm
stl Large OD—may rub in drybox
3 MB | June 6, 2026
spool_sleeve-SpiderMaker-52.4mm
stl spool_sleeve-SpiderMaker-52.4mm
stl Large OD—may rub in drybox; Too thin—no side holes
880 kB | June 6, 2026
spool_sleeve-Old_Atomic_Filament-54.7mm
stl spool_sleeve-Old_Atomic_Filament-54.7mm
stl Contributed by @LeonGrossman_470529
3 MB | June 6, 2026
spool_sleeve-New_Atomic_Filament-54.1mm
stl spool_sleeve-New_Atomic_Filament-54.1mm
stl AMS-compatible; Contributed by @LeonGrossman_470529
3 MB | June 6, 2026
spool_sleeve-KINGROON-58.3mm-57.7mm
stl spool_sleeve-KINGROON-58.3mm-57.7mm
stl Contributed by @lvpvsinfabvla_28917
3 MB | June 6, 2026
spool_sleeve
py spool_sleeve
py 14 kB | June 6, 2026
spool_sleeve
scad spool_sleeve
scad 26 kB | June 6, 2026
The author marked this model as their own original creation.
