SOLDR Magnifier Module

This is a magnifier module for SOLDR kits or something else if it fits your purpose. It has an adjustable body due to the gooseneck connecting the base to the magnifying glass.

Parts used

• 1x base model – 3D printed using black filament

• 6x magnets – to properly hold the module to the metal base

• 1x gooseneck – I used a 15 cm one with M8 and M10 thread on each side, but changing it to a longer or smaller one should be easy

• 1x magnifying glass – I used a 45 mm diameter one that I removed from a cheap magnifying glass I bought

• 1x magnifying glass holder – to connect the gooseneck to the glass. I used a fluorescent yellow filament from SUNLU to match the color scheme of the rest of the SOLDR kit as best as possible

For more details and building process:

• https://robotsandcoffee.co/a-magnifier-module-for-the-soldr-kit/ (in english)

• https://robotsandcoffee.co/pt/a-magnifier-module-for-the-soldr-kit/ (in portuguese)