Silica gel spool container (34mm) and funnel

Reduced to 34mm height (inclusive of the cap), otherwise no change. Also a funnel I use with these containers that is made from a modification of the original cap.

My first-in-first-out dispenser pictured above is used to re-dry the desiccant containers inside my EDry cabinet. I will post this design later (and include the link here when I do). 

See my BarrittWorks video “No More Wet Filament!” about my dry filament system for more about how I use these desiccant containers.

Reduced to 34mm height, otherwise no change to container. Funnel created by modifying the cap.