This is an Adapter Kit to mount my Manta MK2 cooling system on the Ender 5 Core XY MK3 Conversion.
Please Note: The adapter kit is not compatible with the existing Stock Hot End.
Ender 5 Core XY Conversion here: Ender 5 Core XY with Linear Rails MK3 by boothyboothy | Download free STL model | Printables.comttps://www.thingiverse.com/thing:5157811
Manta Mk2 Cooling System here: Manta MK2 Duct & Tool Head System by boothyboothy | Download free STL model | Printables.com
This is work in progress. I have test printed the parts but have not installed on my Ender 5.
Please refer to both previous thing Installation Guides for general assembly details.
No supports are required for any of these parts. I would recommend using either ABS or PETG with a minimum of 30% infill & 3 perimeters.
Update: 05_01_22 Uploaded a revised Direct Drive adapter plate with recessed fixing holes to make sure the fixings do not conflict with any future Tool Head customisation. Please note 4 x M3 x 10 mm bolts could now be used with this plate.
Category: 3D Printer Parts
The author marked this model as their own original creation. Imported from Thingiverse.