RAK5005 Case

We've all been there, excitingly powering on your arduino with the program you just coded. Only for the arduino to release the magic smoke because a solder ball or a metal object on your workbench shorted it.

This skirt helps to prevent these types of scenario's for the Wisblock Base Board (RAK5005).

Print settings

Layer height: 0.1-0.3

Infill: 100%  

Supports: No

Brim: Recommended if you have problems with bed adhesion (also looks pretty good (see pics))

This model is made with a tolerance of 0.3mm in mind, if your printer cannot achieve this tolerance, it's advised to scale the model up by a percent or 2.

On the contrary, if your machine is really precise, it might make sense to scale down the model in the X and/or Y direction.