lithophane pillar for laptop

I made this for my history teacher who had his laptop on a stack of books. This is a lithophane pillar for a laptop. Top and bottom printed on my cr-30 belt printer there is another option for 4 pieces to connect and glue for people who don't have a belt printer, and on the bottom pieces there is holes to insert sand to way down bottom. Lithophane printed as one piece and put in place and glued. I redesigned it so that it fits in there better, made the slots a little wider due to the way 3d printers print it didn't perfectly align so I did have to use a 3d pen but you shouldn't have to, and here is the link for the lamp fixture. The light bulbs will need to be a lower wattage. No need to worry about the black marks on the bottom of the top piece that came off my belt from the belt printer but you can not see it.
https://www.amazon.com/gp/product/B0986K4RC4