IKEA GRUNDTAL Soap Bar Holder

(Deutscher Text: Siehe unten...)

This is an addition to the IKEA GRUNDTAL shower rack:
For those of you who are still using soap bars, you can now hook a soap bar holder
to the "GRUNDTAL". The Thing hooks under the existing plastic inset on the metal frame.

There are actually two versions: one hooks from the inside, the other one from the outside.

Enjoy, have fun remixing and let me know when you've made one, and what for!
Made with OpenSCAD.

-- Deutsche Beschreibung: --

Seifenhalter für das IKEA GRUNDTAL Dusch-Eckregal
Für alle, die tatsächlich noch Stückseife verwenden, gibt es jetzt eine Seifenablage,
die einfach an das GRUNDTAL Eckregal angehängt werden kann. Der Halter wird an den
Edelstahl-Rand, unter den Plastikeinsatz angehängt (siehe Fotos).

Version 1 hakt sich von innen, Version zwei von außen an den Metallrahmen.

Wenn du einen hergestellt hast, lass es mich über "I Made One" wissen!
Konstruiert in OpenSCAD: viel Spaß beim Remixen!

Print instructions

Category: Bathroom Print Settings

Printer Brand: TEVO
Printer: Tarantula
Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: 5%

Filament: Das Filament PLA or PETG white How I Designed This

Construction (OpenSCAD)

The OpenSCAD file is almost ready to be a customizer.
See the variable definitions on the top of the file in order to resize.

Slicing (e.g. in Cura)

The bend at the top needs some support. Else it won't "fly".
However, especially in Cura, you should put in some "Support Blockers" between the bars and on the top of the "bend": they will print without support, AND it will speed up the printing.

See the picture on where to set the support blockers.