wanhao gr2 osoyoo 3.5 screen mount

this mod was born from the need to remotely control (effectively) the wanhao gr2 with octoprint / octodash.

for more info on configuration and software image (https://www.gdip.io/posts/3d-printing/wanhaogr2/).

The parts needed for this modification are:

• 8 m3 screw 12mm
• OSOYOO - Display touch screen LCD 3,5 https://osoyoo.com/2020/05/29/instruction-for-raspberry-pi-3-5-dsi-touch-screen/
• USB 3.0 male to female extension cable https://www.amazon.it/3-0-cavo-prolunga-adattatore-pannello-industriale/dp/B07BPDSFJY/ref=sr_1_27?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=prolunga+usb+da+pannello&qid=1624010860&sr=8-27
• Micro SD to SD Card Extension Cable and 2 Micro SD / TF to SD Card Adapters 3 in 1 Flash Memory Card https://www.amazon.it/AFUNTA-prolunga-adattatori-Memoria-Compatibile/dp/B07JMTW1YD/ref=sr_1_1_sspa?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=prolunga+sd&qid=1624010951&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyTUNMWkw0WEVMU1g2JmVuY3J5cHRlZElkPUEwNzEzMzkxMzJBSU9EM0FNQU9NQyZlbmNyeXB0ZWRBZElkPUEwOTk2OTU1TTAxR0JJRTgzMExVJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

Full print with 5x5x5 walls/top/bottom and 40% infill

each part is interlocking with the original parts, no modifications must be made

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

No

Resolution:

200

Infill: 

40

Filament: all PETG all

Notes:

happy printing

Category: 3D Printer Parts