Trimming jig for DeWalt DCW600

Adapter that allows the protruding parts to be milled into a plane. The adapter snaps into place on the original base. Assembly and disassembly is a matter of seconds. At the end of the adapter is a spherical handle that helps stabilize the cutter. It is necessary to insert an iron cylinder with a length of 65 mm and a diameter of 30 mm into the spherical handle. The iron cylinder acts as a weight so that the cutter does not predominate. It is necessary to drill a 5 mm hole in the cylinder and cut an M6 thread into it. The adapter has a 5mm hole for gluing an M6 screw without a head.