2020 Mazda Key Fob housing v2

Small remix of 5ambear's Mazda keyfob

Slightly thicker walls to allow for chamfered edges for a smoother edge.

No glue required, just some very tight clearances that allow the pieces to be press-fit. Something like 0.1mm tolerance, so make sure your printer extrusion is tuned well.

Text is done with vinyl decals.

Updated 06/2021: Added v2 version, slightly smaller with stronger snap fit (lid only fits in one direction!) - use tiny screwdriver in slot to pry apart. Should be OK to open/close many times without glue.