Smart Doll Gauntlets

This model is for personal use only. Do not sell this model or prints of this model. For licensing this model to print and sell, shoot me an email at [email protected].

If you make this and post it on social media, state it was made using my files. Thanks!

Working gauntlets for Smart Dolls, made by Enchanterium (& friends) for the KOKO custom doll which can be seen here: https://youtu.be/oD6aOIQpflY

The files include: A - tip of the finger, B - second phalanx, C - third phalanx, D - knuckles, E - thumb swivel part. All of these have the amount needed to be printed written in the file name. The other files are 2 solid files: for the left arm and palm, and 2 hollow presupported files, for the same parts. I'd recommend running the presupported parts through UV tools to make sure they don't fail.

To put this together you will need the following screws:

M3: 30mm - 2pcs, 25mm - 2 pcs, 4 nuts (these lengths are approximate, I'm not sure what lenghts I used)

M1,6: 10mm - 10pcs, 12mm - 10pcs, 14mm - 20 pcs (10 of these will be cut shorter, you could use shorter screws here and in general you can cut these pretty easily), and I think 8mm - 2 pcs for the thumbs + 40 ish nuts. For assembly guidance refer to the video. You will have to drill into the dolls hands to make this secure.

If you enjoyed this model and you're able, any tip will be apreciated, thanks!

Category: Toys & Games