Multi-colour counter with auto-rollover

This is rework of Counter with Auto-rollover. All wheels are printed in one piece and numbers are created as pockets instead of pads. This makes it easy to be printed flat and in dual colour. Both used libraries Parametric Geneva Mechanism and Public Domain Involute Parameterized Gears are used as external files with so less modifications as possible. The enclosure is created from the scratch and it is round for good feeling in the fingers. Your logo can be placed to top and bottom side of it. Counter could be printed in single colour too.

Print instructions

It supports OpenSCAD customiser (not Thingiverse Customiser!) for easier modifications and to export all parts. Just change values as you wish, generate and export (amf format is better for multi-colour print). Some size settings can broke whole thing so change them wisely.

For single colour print use only main_parts.amf or main_parts-logo.amf.

For dual-colour print (numbers with different colour) use main_parts.amf and wheel_numbers.amf.

For triple-colour print (numbers and logo with different colour) use main_parts-logo.amf, wheel_numbers.amf and logos.amf.

If you using Prusa Slicer, perimeter_blockers.amf can be used as modificator for 0 perimeters, that make wheel background around the numbers nicer (i think :-).

As logo example is used open source hradware logo, replace it with your own in svg format.