Cartoon Easter Bunny for your Garden

This cute Guy is about 28cm/11 inch tall, you can use him for your Easter decoration.

It is easy Print, and easy to assemble. Use the “connector” Piece which helps when you glue Head and Body together.

If you print him in ABS, you can use him the whole Year in your garden. 

If You are interested in other Projects like this, feel free to visit me under https://www.instagram.com/tobi_franke/

Print Instructions

• I was Using ABS for this Print, to make it watertight.
• Use a Perimeter of 4 Layers, to make it realy strong
• An Infill of 5% is enough
• Use a Brim of at least 4mm, to make it stick to the Pad and to prevent warping
• I used Supports, under the Arms, and under the Nose.

Painting Tips

Ive printed that little guy in white ABS, which gives a good base colour. To make him more shiny, then ive painted him a white water based lacquer. The Coloured Parts of the Body were made with a Airbrush. Details like the Eyes were made with a thin brush. You can combine many different colour Schemes for this bunny, feel free to share your Version with me, i am always curious what you guys will come up with!

Have fun!