Filament Swatch Sample (with holder)

Remix from Robee Shepherds Design.
My changes:
- Longer (110mm to have enougth space for longer names) 
- A font which is better readable when printed
- Bolt & Nut are unchanged

You will need either OpenSCAD or Fusion 360 if you want to change the text. If you don't and just want blanks I have included an STL file with a 110mm long one and no text on it.

Adding text is very easy though, for Fusion 360 just Edit the Sample Sketch, double click on the top text and change it, do the same for the bottom, and then export an STL file for your favourite slicer.

For OpenSCAD, open the file in the editor and change material/brand/colour variables. When you are happy with it, uncomment out lines 4-6 and render (F6) and export. (Super special thanks to Andy Stanford-Clark for his help and support in making and testing this)

I like to include the material type, colour (abbreviate it if it's too long) and brand. :)

Each nut and bolt will hold 10 samples.

Print instructions

Ensure the nut and bolt are oriented as in the example slicer screenshot, then you won't need any supports.