Stand for ClockWork uConsole

.gallery-skeleton { display: none; }

Stand for ClockWork uConsole that allows to use any 10mm rod and M5 screws with self tapping inserts.

291

aktualizováno 6. dubna 2026

Popis

Based on the stand from JGM

I needed more room to clear the fan when closing and opening the stand.

After some attempts, I decide to make if more stable and used a carbon fiber rod (10mm) and M5 screws with self tapping inserts for the foot.

EDIT: small cosmetic upgrade on version 2,

Autor tento model zremixoval.

Removed the stand foot, added holes for a round rod, extended the arms length in 5 mm.