french cleat square holder (v2)

This french cleat organizer is meant for smaller squares with max size thick side: ~15mm and thin side: ~5 mm. It has place for 2 items. If you need more just print a couple of them and put them side by side.

update 6.1.2024
The model had some problems with stability.  Finally I found time to fix it. I added 3 new versions.

• cleat_square_holder: is like the previous one, but more rigid and stable
• cleat_square_holder_big_support: bigger version, with lower point of gravity. Print it like the model is orientated. Use organic supports via prusa slicer paint on automatic support
• cleat_square_holder_big_nosupport: like cleat_square_holder_big_support, but with higher point of gravity. You can print it sideways with supports for optimal strength or just without support like the object is orientated 

Print instructions

• 15% 3D honeycomb/gyroid infill

Additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.