Nightingale Interoperable Magazine [N.I.M.] – 10 Round

This is my first foray into 3D model design, so I adapted and modified Bogarto02's 8 round Nightingale magazine to be used in both Nightingale and Smiley blasters with the only hardware requirement being a single Talon Magazine spring required. (I get mine from UKNERFWAR)

The magazine holds 10 rounds and uses the follower guides to prevent over filling of the magazine, the base plate has two holes in the base to allow for future designs of magazine pullers. The base body pin, once inserted can be left as is or heat melted depending on your preference.

I would recommend printing the magazine in PETG filament.

Big shout out to Bogarto02 for the original design.

As people print and use the design, please let me know which blasters it is also compataible with and I'll update the below list or if you have suggestions for improvements let me know! :)

Compatiable Blaster List

• Nightingale Mk1

• Smiley - Nightingale Magfed Bolt Action Blaster

• Increased to 10 rounds, instead of 8.
• Follower now has side rails
• Lip is curved to allow rounds to exit without catching
• Back mag catch added to allow for Smiley blasters to use.
• Follower has a bottom skirt to help hold springs in without needing a screw
• Base spring allows for ‘In field’ changing of springs.
• Uses a standard ‘Talon’ spring.