Obscura One

📸 Obscura One – Open Source Camera

Obscura One is a fully open-source, 3D printable DIY camera with a nostalgic early-2000s digital vibe.
It’s designed to be simple, affordable, and easy to build in just a few hours.

The camera is powered by an ESP32-CAM module and controlled with a single button:

• 1 click → take a photo

• 2 clicks → photo with flash

• hold → Wi-Fi mode to download images

All parts are easy to source (under ~€30), and the entire enclosure is fully 3D printable.

👉 Full build guide, wiring, firmware, and files on GitHub:
https://github.com/chriko3/ObscuraOne

Recommended settings:

• Material: PETG

• Layer height: 0.15–0.2 mm

• Infill: ~20%

• Supports: Required for case and back cover

• PETG i used https://amzn.to/4vvWlwI

Note: This is a affiliate link.

The last three pics are photos made with the camera :)