MadBaxRC 3D Printable Remote Controlled Car 1/18 Scale

🛠 DIY Hobby-Grade 3D-Printed RC Car

Create your own 1:18 scale 4×4 hobby-grade RC car using this durable, beginner-friendly 3D-printable chassis design.

🚗 Project Overview

• Top Speed: Up to 35 km/h (22 mph) with a brushed setup (higher speeds possible with upgrades)

• Runtime: Approximately 20–40 minutes per charge

• Drivetrain: All-wheel drive (4×4)

• Design Goals: Built for strength, modular upgrades, and realistic driving performance

• Best For: Makers, RC hobbyists, and DIY beginners

📦 What You Get

• STL and 3MF files for the complete chassis

• Compatible with PLA, PETG, or Nylon

• Designed for standard FDM 3D printers

• Parts list (BOM) and build guides linked below

• Step-by-step video tutorials available on YouTube

📚 Resources

🧾 Parts List (BOM):
https://itkacher.com/pages/3d-printed-rc-car-parts-list-bom

🛠 Assembly & Printing Tips:
YouTube Playlist

🎥 Durability Tests:
Crash Test & Evolution

⚠ Not Included

• Electronics (motor, ESC, battery, servo, etc.)

• Pre-assembled components

🔐 License

This project is for personal use only.
Reselling, modifying for redistribution, or sharing the files without permission is prohibited.

⚙ 3D Printing Settings

Detailed printing instructions are available here:
https://www.youtube.com/watch?v=j1goG4zAzGU&list=PL_cMKQPjFnYkGlXbOvDIIxGB8cfsI9lvV