10" rack mount Ubiquiti Cloud Gateway Ultra/Max

10" rack tray for the Ubiquiti Cloud Gateway Ultra/Max gateways. Model is split in 3 parts (tray, left- & right mount) to be printable on smaller print-beds. The left mount also contains a slot for a Keystone jack. The mountings are attached with M3 screws to the heat-set threaded inserts in the tray. If you have a printer with larger print-bed you could just print the parts as one unit...

Update 20260402: Added a 3d printable keystone slot cover (blind) model. Will need support for print.

BOM (if you print as 3 parts)

4x M3x8 machine-screws

4x M3 heat-set threaded inserts

Optional

1x Keystone RJ45 female/female adapter

or

1x Keystone Blind adapter