Dodgy Arcade2TV-XR Undershelf

I got the haptics kit for the X-Arcade Arcade2TV-XR/Tankstick-VR and thought the replaced top woud make a great shelf, and I was right! Then I added a monitor arm and a rotatable monitor and my top shelf is no longer top shelf. Well, time for a bottom shelf!

This is just a simple shelf to go under your controller. It rests on top of the stand's glowing X-Arcade sign and seems sturdy enough. It leaves space for a keyboard, mouse, controller, or whatever else is less than 9cm tall (at my preferred stand height). Sure, you'll need to pull them out to actually use them, but at least there's a place to put them away when you're done!

The shelf is 20cm deep and 18cm wide. Print three to go side by side to cover the ~54cm across the top of the sign. Or maybe you just want 1 or 2. It should even be easy to customize them by changing the width in your slicer. (Be sure to unlink the scaling so you only change the correct direction.)