Storage tube

Simple storage container following 45 degree overhang rule. (no supports/bridging)

Thin wall 0.8mm thick for a standard 0.4 extrusion width.
Thick wall 1.44mm thick for a 0.72 extrusion width or with infill/more perimeters.

Print instructions

Green Printed at 0.3 layers, 0.6 nozzle Bowden on a Raise3D N2 in PLA.
Blue printed at 0.2 layers, 0.4 nozzle on a Craftbot in PETG.

Flip lid before printing.