Stepper motor visualizer for Prusa i3 MK3S+

Stepper motor visualizer for Prusa i3 MK3S+ inspired by the points of the compass. It is required to buy a neodymium magnet to put the visualizer on the stepper motor. The best size for the magnet is Ø 8 X 4 mm. I recommend to use Loctite 401 to glue the magnet to the model.

The model itself can be printed with default settings, 0.4 mm nozzle and 2-3 perimeters with 100% infill. Recommended materials are ABS or PETG.