Safe Box

It is a box to keep your things safe (no judging on what you want to hide ) that you want to hide. there are two spring loaded latches which keep the lid shut. to open them two buttons are on either side so press them to open the lid. Moreover there is a key mechanism aswell. the key turns a gear which slides a rail with unlocks the box. On the top there is a cool dragon design.

Assembly instructions :

1) for the latches first insert the springy buttons through the holes while super glue is applied to the outer perimeter circle (make sure the hole for the latch are on the top side aligning with the holes in the box)

2) then insert the latches into the springy buttons (use super glue to reinforsce them)

3) the key mechanism is the tricky part. first add the gear thingy to the wall (grey seperation wall) and place the stopper behind it.

4) now place the wall inside the box.

5) now place the rail inside and keep holding it while you insert the little grey piece through the hole in the wall and the red rail (super glue it if you want it extra sturdy)

Quick note the assembly reference contains the older top but that does not matter because the hinge is print in place so that would not effect how the base is assembled