Foxbat/Parallax shovel handle minimal reprints and hardware

A Foxbat and Parallax handle with minimal reprints and hardware. 

I printed both parts with 5 walls and 25% gyroid density. Place the middle part with the arms facing up and the back part with the curved side facing down. There should be enough support in the angle to not have the sides fall.

Higher density=stronger build.

Only 2 more small screws should be needed compared to the normal T-pull handle. Screw placement should be self-explanatory, but regardless they should go in through the small holes with the heads of the screws in the adjacent cylindrical openings.

Changes the top T-pull into a shovel handle shape.