Sheep Phone Stand

Easy to print model of a Sheep to hold your smartphone

 Also as a:
- full model , without place for a phone
- keyring

 There are files for a multicolor print (Skin, Wool, Nose, Eyes-Inner, Eyes-Outer, Mouth) but you can also paint the base model if you like

 If you want to sell prints of this models write to me

 See more designs in my Phone Collection
https://www.printables.com/@C47_3d/collections/793008

 Number in file names is a space for a phone in milimeters
For a phone thickness of 8-16mm - numbers will also be on the bottom of printed models

 To resize the models use the equasion:
'Needed space (in milimeters)' divided by 'model number' multiplied by 100% = 'Needed model size in percent'
For example if you need more stable 16mm you can take 10mm version resized to: 16 / 10 * 100% = 160%

 Suitable with a phone set horizontally and vertically (tested with a 12mm thick phone)
The smaller the gap between the print and a phone the more stable the phone stand is
You can resize smaller version to the bigger size for more stabbility

 The gap for a phone is cut with 12dgr angle

 KEYRING
To make a keyring use a Sheep model of your choice and add there a keyring addon - then merge both models

 MULTICOLOR
Select files: Eyes-Inner, Eyes-Outer, Mouth, Nose, Skin and Wool (of your choice) - and optional Keyring - then drop them in the slicer and click 'yes' if asked to merge the models (if there is no notification you will need to merge it by yourself - use right click menu)

 You can print it with 2+ colors (examples on last image)

Printing tips

Printed with 0.16 and 0.2mm (multicolor) layer height
2-3 walls
NO supports needed
Some infill may be usefull (~10%)