Nintendo switch style apple watch charger

Thank you for your work and sharing ;)

Does this model fit on Apple Watch S7 45mm? And maybe with the case? Thanks

Thanks for the model! Printed this using 0.16 layer height. Middle part I printed with 100% infill and Joycons were printed with 35%. this was my first multipart print and it was my first time attempting a color change by manually swapping filament. My daughter was very happy with the results.

Printed it at 0.28mm with a 0.4mm nozzle, changed color manually. Worked perfect! Maybe the joycons i would have made it with a height of 0.2mm or less but i forgot.
Looks amazing and cute! Thank you for the model!

Works really well, thanks for the design!

Absolutely lovely model! Printed this in parts using different colors of PETG at 0.16 mm layer height. I recommend printing the joycons facedown to get a better finish from the bed texture. The buttons are very small. I had to use tweezers and super glue to put this together. Well worth it! (edited)

Printed on Bambu Lab P1P. (Extra Fine)
- Watch hole is too tight
- buttons should all be designed in 1 piece attached around the back

Easy to print without support. Thank you.

Nice looking model, the right joycon seems to have some weird artifacts when sliced with Cura, not sure if related to the object or Cura itself.