Project Halo

Designed this lamp as a desklamp with a cool, timeless design.

Printing:

The ring is broken down into 3 pieces + lit, so printing is possible on my anycubic i3 mega. All parts fit snug into each other but i glued them together for a perfect fit. Afterwards filled with filler and sanded down and painted for the final look.

LED:

The LED strip is a 12 mm strip, 12V non-waterproof and can be found here: https://de.aliexpress.com/item/32934275975.html?spm=a2g0s.9042311.0.0.68964c4dsPZXO1

Power supply:

The power supply i used is a 12V 6A gotten from here: https://de.aliexpress.com/item/1005001818826878.html?spm=a2g0s.9042311.0.0.68964c4dsPZXO1

Controller:

I used a standard gledopto zigbee controller from here: https://de.aliexpress.com/item/32858603964.html?spm=a2g0s.9042311.0.0.27424c4dlbIc7K

Print Settings

Printer Brand:

Anycubic

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

200

Infill:

Filament: anything will work PETG white

Notes:

filled the print with filler

glued all sections together and smoothed every surface with filler, then sand it down to achieve smoothness

all surfaces smooth

colour the print